Stirrer Accessories
Glas Col LLC Stirrer Accessory
90 degree clamp for 1/2" to 3/4" diameter rod, used with sitrring systems and stir tester systems.
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 100mL-5L Flasks, 468mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 100mL-5L Flasks, 468mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences 5/8" Upper Female Motor Adapter (Gold)
5/8" Upper Female Motor Adapter (Gold). Tru-Stirrer Shaft Coupling Replacement Component.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 20000mL Flasks, 55/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Perforated, 10mm, for 22000mL Flasks, 55/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are perforated. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 3 to 12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 3L-12L Flasks, 610mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Ace Glass, Inc. 10mm 64cm stainless steel stir shaft, PTFE covered, drilled type
64cm long PTFE-covered, 10mm O.D. stainless steel drilled-type stirring shaft. Can be used unlubricated with a water-cooled Trubore bearing to achieve 500 rpm maximum. When used with a Trubore bearing lubricated with stir-lube, 1500 rpm maximum can be achieved. When used with a condensate film as an added heat transfer agent, 2000 rpm maximum can be achieved.
Chemglass Life Sciences 10mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Female Coupling, For Use with CG-2021 Thru CG-2025
10mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Female Coupling, For Use with CG-2021 Thru CG-2025. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 10mm (OD) stirrer shafts. Female Upper Coupling is 3/8". For use with CG-2021 thru CG-2025 series of motors and stirrers. Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 56mm Length, 24/40 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 60mm Length, 24/40 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences Diameter x Height (mm): 125 x 43, Reactor Size: 2L-5L
Diameter x Height (mm): 125 x 43, Reactor Size: 2L-5L. Heavy duty PTFE anchor made of 0.500 thick PTFE. Blade is shaped to mirror the contour of Chemglass cylindrical reactors. Designed for use with CG-2078 Chem-Stir 10mm stirrer shaft. The blade is secured to the stirrer via a PTFE pin. PLEASE NOTE: CG-2081-A-02 IS NOT RECOMMENDED FOR USE WITH BAFFLES OR THERMOCOUPLES.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Glass Agitator, Three-Blade, 625mm OAL, for 3000mL Reactors, 105mm OD Agitator
Stirring Shaft, 19mm, Polished, Glass Agitator, Three-Blade, 625mm OAL, for 3000mL Reactors, 105mm OD Agitator. Shaft is precision ground and polished to fit our CG-2086 19mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward.PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Ace Glass, Inc. Stir blade, stainless, 24x160mm, 10mm shaft
24X160mm 304 SS stir blades for 10mm O.D. button type stir shafts. For compatible stir shafts see ACE 8068, 8070, 8074, and 8075 series.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, 555mm OAL
Stirring Shaft, 10mm, Polished, 555mm OAL. A 10mm precision ground and polished stirrer shaft for use with PTFE bearings and CG-2091 and CG-2092 PTFE agitators. Flat ground section extends half way up shaft and permits positive seating of the PTFE locking screws.
Chemglass Life Sciences Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint
Stirrer Bearing with side Hose Connection, PTFE, Complete, fits 10mm Shaft, 29/42 Inner Joint. PTFE stirrer bearing with a hose connection for vacuum or inert gas source on a single neck flask. Grease-free design has only glass and PTFE in contact with the reaction, and can be used under moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint size, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. Saddle o-ring provides vacuum tight seal and is replaceable at a fraction of the cost of the entire bearing. Hose connection is 10mm at the largest serration. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 5000mL Flasks, 45/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences 6mm Stirrer Bearing, 14/20
6mm Stirrer Bearing, 14/20. Replacement part for CG206001 Micro Stirrer Assembly.